When preparing the lenses for the customer, opticians need to be very precise in their work. Optics is an exact science, and precision is required so that the lenses would fit well with both the frame and the wearer. Various troubles can ensue from a poor fit. If the lenses do not fit the frame, they might start to fall out of the frame at random. Also, bad fit lenses can also produce health problems for the wearer and even cause further eye damage. In order to gain precision and not make mistakes, most opticians use special equipment and machines that allow more precise cutting with ease.
One of the machines in the precision-cutting series is the CP-4A machine for cutting optical lenses. With it, the optician can cut the lens precisely as the rim requires. It also allows milling to be done on the lens, which means that the optician can fine tune the edges. It is suitable for use with plastic lenses. Its body is made of non-corrosive material, so aside from being precise, this machine is also very durable.
The machine has qualified for CE approval and is produced according to strict quality control guidelines.
*Can cut lens with thickness less than 16.1 mm
*Quick cutting speed
*Imported milling cutter
*With a knob to control the size of lens to cut
*Put a lens which has been marked the axis on lens meter and layout blocker into the position of lens and then fix it by left knob and be ready to cut.
Maximum lens thickness: 16.1mm
Power Supply: AC 220 V/ 50 Hz; AC 110 V/ 60 Hz; 120 W
Weight: 5 kg
Application: Can be used to cut resin lens(CR-39) with abbe below 1.61
Cutting effect: Plat side
Adjusting Size Range: -8 ~ +8 (-8 means: the same size as pattern, 0 means 0.5 mm bigger than the pattern; +8 means 1.0 mm bigger than the pattern)
Cutting Speed: 30 s per lens